Menu item Sub-menu item Sub-menu item Description
Paper out action Wait forever*
Cancel
Override
Select how the product should react
when a print job requires a size or type
that is not available or when a specified
tray is empty.
Select the Wait forever option to make
the product wait until you load the
correct paper and press the OK button.
This is the default setting.
Select the Override option to print on a
different size or type after a specified
delay.
Select the Cancel option to
automatically cancel the print job after a
specified delay.
If you select either the Override or
Cancel options, the control panel
prompts you to specify the number of
seconds to delay. Press the right arrow
button to increase the time, up to
3600 seconds. Press the left arrow
button to decrease the time.
Print quality Calibrate color After power on
Calibrate now
After power on: Select how soon the
product should calibrate after you turn it
on. The default setting is 15 minutes.
Calibrate now: Makes the product
perform a calibration immediately. If a
job is processing, the product calibrates
after the job is complete. If an error
message displays, you must clear the
error first.
PowerSave Time Sleep Delay 15 minutes*
30 Minutes
1 Hour
2 Hours
Off
1 Minute
Sets how long the product remains idle
before it enters PowerSave mode. The
product automatically exits PowerSave
mode when you send a print job or
press a control panel button.
Display contrast Medium*
Darker
Darkest
Lightest
Lighter
Select the level of contrast for the
display.
80 Chapter 2 Solve problems ENWW
To Next Page
Loading...