Product guide | HP LaserJet Pro M501 series
13
Environmental and power specifications
HP LaserJet Pro M501dn
Temperatures
15 to 32.5°C (59 to 90.5°F); Storage: -20 to 60°C (-4 to 140°F); Recommended: 17.5 to 25°C (63.5 to 77°F)
Relative humidity range
Operating: 10 to 80%; Non
-operating: 10 to 90%; Recommended: 30 to 70%
27
Ready mode: 4.0 B(A); Active printing: 6.8 B(A)
(both models)
Acoustic pressure
emissions (bystander)
Ready mode: 25 dB(A); Active printing: 54 dB(A)
(both models)
28
ENERGY STAR certified, EPEAT® Silver registered models
available
29
Power supply required
Input voltage: 100 to 127 VAC, 60 Hz; Input voltage: 200 to 240 VAC, 50 Hz (Not
dual voltage, power supply varies by part
number with #option code identifier)
Power consumption
660 watts (Active Printing), 6.1 watts (Ready), 1.3 watts (Sleep), 0.7 watts (Auto
-On/Auto-Off, via USB connectivity), 0.1 watts
Typical Electricity
Consumption (TEC)
1.677 kWh/Week (Energy Star
) (both models)
Energy-saving features
-on Technology, HP Auto-On/Auto-Off Technology
20
(both models)
Environmental
specifications
both models)
Safety and regulatory
compliance
-1:2005 +A1:2009 +A2:2013 (International); EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 (EU); EN
-1:2007 / IEC 60825-1:2007 (Class 1 Laser Product); EN 62479:2010 / IEC 62479:2010; Low Voltage Directive
2006/95/EC with CE Mark (Europe); GS Certificate (Germany, Europe); UL/cUL Listed and UC CoC (US/Canada); CAN/CSA C22.2 No.
60950
-1-07 2nd Ed. 2011-12 Compliance with Laser safety standards 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser notice No. 50, Dated June 24, 2007; Other safety approvals as required by individual countries
Electromagnetic emission
standard
CISPR 22:2008 (International)
- Class A, EN 55022: 2010 (EU) - Class A, EN 61000-3-2: 2006 +A1: 2009 +A2: 2009, EN 61000-3-
3: 2008, EN 55024: 2010, EMC Directive 2004/108/EC; FCC CFR 47 Part 15 Class A / ICES
-003, Issue 5 Class A, Other EMC
approvals as required by individual countries