Cartridge door
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
●
Scanner assembly. See
Scanner assembly on page 14.
Remove the cartridge door
1. Open the cartridge door. Use a small flat-blade screwdriver to release the tab on the support arm on the
right.
Figure 1-23 Remove the cartridge door (1 of 3)
2. Release the two hinges by pulling outward on the supports.
Figure 1-24 Remove the cartridge door (2 of 3)
ENWW Removal and replacement procedures 17
To Next Page
Loading...
