HP LaserJet Pro MFP M129 User Manual

1
Português ....... 17
Español ........... 12
Français ............ 6
English .............. 1
Windows
1. For Windows 7 or lower, do not connect the USB cable before installing
the software. The installation process prompts to connect the cable at
the appropriate time. If the cable is already connected, restart the printer
when installation prompts to connect the cable.
2. Continue to “6. Locate or download the software installation les.”
NOTE: During Windows software installation, select the option to connect
through a network.
Mac
1. For Mac, connect the USB cable between the computer and the printer
before installing the software.
2. Continue to “6. Locate or download the software installation les.”
Wireless network connection
(wireless models only)
Touchscreen control panels
1. To connect the printer to a wireless (Wi-Fi) network, on the printer control
panel, touch the Wireless button.
2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select
the network name from the SSID list, or enter the network name if it is
not listed.
3. Use the keyboard to enter the passphrase, and then touch the OK button.
4. Wait while the printer establishes a network connection.
5. On the printer control panel, touch the Network button. If an IP address
is listed, the network connection has been established. If not, wait a few
more minutes and try again. Note the IP address for use during software
installation. Example IP address: 192.168.0.1
6. To print from a computer, continue with “6. Locate or download the
software installation les.” To print from a phone or tablet only,
continue with “8. Mobile and wireless printing (optional).”
2-line control panels
1. To connect the printer to a wireless (Wi-Fi) network, make sure that the
printer, access point, and computer are turned on and that the computer
is connected to the wireless network.
2. A USB cable will be required.
3. Disconnect any USB or Ethernet cable that is connected to the printer.
4. To print from a computer, continue with “6. Locate or download the
software installation les.” To print from a phone or tablet only,
continue with “8. Mobile and wireless printing (optional).”
NOTE: During software installation, select the option to Help me set up
arst-time wireless connection.
Wired (Ethernet) network connection
(optional)
Use a standard network cable.
1. Connect the network cable to the printer and to the network. Wait a few
minutes for the printer to acquire a network address.
2. Continue to “6. Locate or download the software installation les.”
NOTE: During software installation, select the option to Connect through
a network.
www.hp.com/support/ljM129MFP www.register.hp.com
LaserJet Pro MFP M129-M132,
LaserJet Ultra MFP M133-M134
Getting Started Guide
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
IMPORTANT:
Follow
Steps 1 - 3 on
the printer hardware setup
poster, then continue
with Step 4.
2
5. Select a connection method
4. Set up the control panel
At the printer control panel, check the display status before beginning software installation.
Manually congure the IP address
See the printer user guide for information on how to manually congure the IP
address www.hp.com/support/ljM129MFP.

HP LaserJet Pro MFP M129 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Manual
Maximum Paper Size	A4
Connectivity	Hi-Speed USB 2.0 port
Display	2-line LCD
Processor Speed	600 MHz
Memory	128 MB
Monthly Duty Cycle	Up to 10, 000 pages
Recommended Monthly Page Volume	150 to 1, 500 pages
Scan Type	Flatbed
Scan Resolution, Optical	Up to 600 dpi
Copy Resolution (Black Text)	Up to 600 x 600 dpi
Copies, Maximum	Up to 99 copies
Weight	7.6 kg
Operating System Compatibility	Windows, macOS, Linux
Energy Star Certified	Yes
Print Resolution	600 x 600 dpi
Paper Input Capacity	150 sheets
Mobile Printing	HP ePrint, Apple AirPrint, Mopria-certified
Dimensions (W x D x H)	420 x 365 x 253 mm