Front cover and control-panel assembly
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
●
Scanner assembly. See
Scanner assembly on page 14.
●
Cartridge door. See
Cartridge door on page 17.
Remove the front cover
1. Disconnect the control-panel FFC from the top of the formatter PCA (callout 1), and unwind it from the
cable guides (callout 2).
Figure 1-26 Remove the front cover (1 of 5)
2
1
ENWW Removal and replacement procedures 19
To Next Page
Loading...
