Wireless PCA (wireless models only)
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
Remove the wireless PCA
1. Disconnect the control-panel FFC from the top of the formatter PCA (callout 1), and unwind it from the
cable guides (callout 2).
Figure 1-53 Remove the wireless PCA (1 of 3)
2
1
2. Remove two screws (callout 1), and remove the wireless PCA and holder (callout 2).
Figure 1-54 Remove the wireless PCA (2 of 3)
1
2
ENWW Removal and replacement procedures 35
To Next Page
Loading...
