Formatter PCA
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 12.
●
Left cover. See
Left cover on page 13.
Remove the formatter PCA for base models (M125a, M125r, M125ra)
1. Disconnect the black scanner FFC from the bottom of the formatter (callout 1). Disconnect the white
control-panel FFC from the top of the formatter (callout 2), and unwind it from the cable guide (callout
3).
Figure 1-57 Remove the formatter PCA for base models (1 of 2)
1
2
3
2. Disconnect three connectors (callout 1). Remove three screws (callout 2). Remove the formatter PCA
(callout 3).
Figure 1-58 Remove the formatter PCA for base models (2 of 2)
3
2
1
ENWW Removal and replacement procedures 37
To Next Page
Loading...
