Connect to a network
The HP LaserJet Professional P1600 printer series can connect to networks through the HP internal
networking port.
Supported network protocols
To connect a networking-equipped product to your network, you need a network that uses the following
protocol.
●
Functional wired TCP/IP network
Install the product on a wired network
NOTE: To resolve network connection problems, see Solve connectivity problems on page 104.
You can install the product on a network by using the HP Smart Install or from the product CD. Before
you begin the installation process, do the following:
●
Connect the CAT-5 Ethernet cable to an available port on the Ethernet hub or router.
●
Connect the Ethernet cable to the Ethernet port on the back of the product.
●
Verify that one of the network lights is illuminated on the network port located on the back of the
product.
28 Chapter 4 Connect the product ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...