HP LASERJET PROFESSIONAL P1600 series - Solve repeated jams; Change the jam recovery setting

Solve repeated jams
ł
Verify that the input tray is not overfilled. The input tray capacity varies depending on the type of
print media that you are using.
ł
Verify that the media guides are properly adjusted.
ł
Check that the input tray is securely in place.
ł
Do not add print media into the input tray while the product is printing.
ł
Use only HP-recommended media types and sizes.
ł
Do not fan media prior to loading it in a tray. To loosen the ream, hold it firmly in both hands and
twist the media by rotating your hands in the opposite direction.
ł
Do not let print media stack up in the output bin. The print media type and the amount of toner used
affect the output bin capacity.
ł
Check the power connection. Make sure that the power cord is firmly connected to both the product
and the power supply box. Plug the power cord into a grounded power outlet.
Change the jam recovery setting
When the Jam Recovery feature is turned on, the product reprints any pages that are damaged during
a jam.
1. Open the product Properties dialog box.
2. Click the Device Settings tab.
3. Click the Auto option or the Off option under Jam Recovery.
ENWW Clear jams 89