• Regarding the other Rendering Intents it is recommended to always
use Relative Colorimetric as well.
Step 4: Printing the proof
A proof job can be created from the RIP Queue, Job Editor, or by using a Quick Set.
1. Automatic Proofing Method – Quick Set
a. Select the created media on each printer.
b. Change the Start print setting to Manual on both printers.
c. Open the job in the HP Latex 3000 queue.
d. If Create proof automatically was selected in the Quick Set, a proof job will be
created automatically for the HP Latex 300.
2. Automatic Proofing Method – RIP-Queue
If Create proof automatically was not selected in the Quick Set, follow these steps:
a. Highlight the desired job in RIP-Queue.
LFP Customer Assurance 17 HP Restricted
To Next Page
Loading...
