b. Right-click the job and select Proof. RIP-Queue creates a new job and appends “-
Proof” to the job name. The original job is placed on hold until you release it.
In both cases, notice that the “-Proof“ job is sent to the HP Latex 360 and the original is on hold
waiting for confirmation on the HP Latex 3000.
• Please, make sure that the correct media and printmode is selected on each printer.
• Once it is printed on the Latex 300 printer and the proof is approved, the printing job can
be sent to the Latex 3000 by the operator.
3. Manual Proofing Method – Job Editor
a. Select the created media on each printer.
b. Change the Start print setting to Manual on both printers.
c. Open the job in the HP Latex 360 queue.
d. To Proof from Job Editor:
LFP Customer Assurance 18 HP Restricted
To Next Page
Loading...
