HP Latex 3000 - Page 19

• Highlight the desired job in RIP-Queue and select Open Job in Job Editor.
• Select the Color Management Quick Set defined in Step 3.5.b.2.ii (see ii
).
Make sure the default profiles and Rendering Intents are the correct ones. If
you change any ICC default profile or any Rendering Intent, please make sure
to specify the same settings when printing later on against the HP Latex
3000.
e. Printing to the HP Latex 3000 target printer
• Print with the same Color Management settings as done against the HP Latex
300 printer except that no proofing ICC profile nor Proofing Rendering Intent
is to be selected.
4. Periodic printer calibration
a. Please remember that periodically and whenever a color deviation is observed, the
printer should be calibrated/linearized.
If the Calibration does not bring the printer back to its original conditions, then please consider re-creating
its ICC profile for the media and printmode. In case you are following a manual proofing and the target
printer ICC has been re-created, please export it from Media Manager and place it again in the Color
Management quick set for the proofer as the Proof ICC Profile.
Resources
Additional help and or technical support can be found on the ONYX Web site.
Disclaimer
This document has been prepared solely for the purpose of providing information about RIP printing instructions. This document
has been compiled in good faith. In particular, you should be aware that this information may be incomplete, may contain errors or
may have become out of date. HP shall not be liable for technical or editorial errors or omissions contained herein. The information
statements are provided for information purposes. HP makes no warranties or commitments of any kind with respect to the above,
and does not represent or endorse the accuracy or reliability of any of the information, content or advertisements contained on,
distributed through, or linked, downloaded or accessed from any of the services contained on this website nor the quality of any
products, information or other materials displayed, purchased, or obtained by you as a result of an advertisement or any other
information or offer in or in connection with the media products.
LFP Customer Assurance 19 HP Restricted