Finish off after cleaning the ink deposits
1. If you removed it earlier, put back the upper section of the right front cover and screw it into place.
2. Close the right front cover and screw it into place.
3. Ensure that the cleaned parts are completely dry.
4. Turn on the printer in the correct way for maintenance operations: see
Turn the printer on on page 120.
Clean the carriage rails and replace the oiler foams
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation hazard Electric shock hazard
For more safety information, please see
Safety precautions on page 2
Prepare to clean the carriage rails
1. Ensure that you have the Carriage Rail Cleaning Tool provided with your printer.
2. Ensure that you have the cleaning wicks (one bag of 20) and a 10 ml bottle of lubricant oil from the HP
Latex 3000 Printer Cleaning Kit, also provided with your printer.
136 Chapter 8 Hardware maintenance ENWW
To Next Page
Loading...
