Carriage view
1. Optimizer printhead latch
2. Oiler foams
3. Printhead
4. Aerosol filters
5. Drying filters
6. Printhead latch
Printer software
Your printer requires the following software:
●
The HP Internal Print Server is provided with your printer and is already installed in the printer's built-in
computer. It displays printer alerts and a summary of printer status, manages print jobs, and must be
used to interact with the printer in various ways. See
HP Internal Print Server on page 16.
●
The HP Print Care program is provided with your printer and is already installed in the printer's built-in
computer. It displays printer status and history in detail, and helps you to maintain the printer and solve
any problems that may arise. See
HP Print Care on page 109.
●
A Raster Image Processor (RIP) should be run on a separate computer; it cannot be installed on the
printer's built-in computer. It is not provided with the printer and should be obtained separately.
12 Chapter 1 Introduction ENWW
To Next Page
Loading...
