During a printhead replacement
●
A reseat message for a particular printhead
●
A printhead replacement incomplete message
●
A numerical error code starting with 46 (46.0X.0Y:ZZ)
During a printhead servicing routine
●
A reseat message for a particular printhead
●
A numerical error code starting with 46 (46.0X.0Y:ZZ)
The message 46.02.0Y:06 – Primer 0Y leakage detected indicates that one of the primer systems leaks. The
number 0Y, where Y ranges from 1 to 7, indicates which primer is leaking.
You are recommended to:
●
Run the primer diagnostic test from the Print Care window to confirm the cause of the error.
●
Reseat the printhead. Make sure to push the primer into position before securing the latch. While
running the test, you will already have done it at least once.
ENWW Printheads 251
To Next Page
Loading...
