Tilt Range
None
Swivel Range
None
Height Adjustable
None
Pivot Rotation
None
Base
(feet)
Display Stand Kit sold separately
Environmental
Temperature - Operating
0° to 40° C
(32° to 104° F)
Temperature - Non-operating
-20° to 60° C
(-29° to 140° F)
Humidity - Operating
10% to 80% non-condensing
Humidity - Non-operating
5% to 95%, 38.7° C max wet-bulb
Altitude - Operating
0 to 5000 m
(0 to16,404 ft)
Altitude - Non-operating
0 to 12,192 m
(0 to 40,000 ft)
Options
(sold separately)
HP LD4730 Frame System - Part
number
A5R07AA
Provides a finished look to your video wall with an easy-to-install frame system,
custom designed for the LD4730. Maintains the clean slim lines of the Ultra-slim
bezel design.
HP DreamColor Display
Calibration Solution - Part
number B1F63AA
Provides a host-less color calibration solution to assure color consistency and
accuracy for all displays in a video wall. Plug colorimeter directly into display -
no host PC needed.
Enable field color calibration to a set white point and color coordinates so that all
displays in the matrix will be set to the same white point and same RGB Color
coordinates to provide color uniformity across the entire wall of displays
HP Digital Signage Speakers-
Part number NK352AA
Add a full range of sound (10 watts each) with these rear-facing speakers that
discreetly attach to the rear of the display.
47-inch Display Stand Kit (feet)
-Part number XT656AA
The two-footed stand provides support for the digital signage display when used
on a table top. Designed to help the display maintain stability when touched, the
feet slide into to bottom of display and lock into place with included screws.
HP Business PC Security Lock
Kit-Part number PV606AA
Attaches to the rear of the display with a six-foot steel cable to protect it against
unauthorized removal by physically connecting it to an anchor point.
HP Digital Signage
Installation Service
A range of installation service Care Packs. See
www.hp.com/go/digitalsignage
.
Other
Accessories Included
VGA cable, DisplayPort cable, Power cable, Remote control, IR cable, IR receiver
module, Documentation kit
Software
HP Network Sign Manger - management software which runs on any network
connected media player or PC and enables central site control and management
of all network attached or serial attached LD4730/LD4730G displays. With HP
Network Sign Manager, you can adjust all the display settings and play media
files stored in the USB device. It also allows you to organize and manage network
attached displays in groups, such as all the displays within a building or campus.
HP Video Over Ethernet - provides video and audio signals using internet
connections between the DSD and media player. It features automatic discovery
of all network attached DSD, dynamic association of DSD with any media
player/computer in the network, automatic re-association in case of network
disruption, automatic association without any operator intervention if the
"Player Name" of any network connected media player/computer is assigned to
the DSD at installation through the display On-Screen Display dialog, ability to
QuickSpecs
HP LD4730 47-inch Micro-Bezel Video Wall Display
HP LD4730G 47-inch Micro-Bezel Video Wall Display with
Protective Glass
Technical Specifications
DA - 14248 North America — Version 3 — April 18, 2013
Page 7
To Next Page
Loading...
Need help?
General
