HP LD 220 User Manual

HP LD 220 Pole Display
Installation Guide
HP LD220 Installation Guide v1.1 Release Date: 12/04/2016
Confidential and proprietary information of UCS Technology Services (Pty) Ltd. Copying or dissemination of this document is prohibited
Compiled by: Wian Maree

HP LD 220 Specifications

General

Resolution	1920 x 1080
Contrast Ratio	1000:1
Response Time	5 ms
Connectivity	VGA
Response Time (gray-to-gray)	5 ms
Color Support	16.7 million colors
Contrast Ratio (static)	1000:1
Input Connectors	VGA
VESA Mount Compatibility	100 x 100 mm

Summary

Document Purpose and Package Contents

Purpose of this Document

Explains the objective of the installation guide for the HP LD220 USB customer display.

What's in the Box

Lists all the components included in the HP LD220 Pole Display package.

First Time Installation

Connect and Configure COM Port

Connect the display via USB and assign COM5 in Device Manager.

Install Device Drivers

Install the HP LD220 drivers using the provided setup utility.

Configure Pole Display Settings

Use the SetupUtility to set COM5, character type, and command mode.

Test Pole Display Functionality

Verify installation by running the HP Pole Display Test utility.

Configure Winbranch and Hipos

Edit P3SETUP.DBF File

Update the CUST_PORT column to 'com5' in the P3SETUP.DBF file.

Update HPBOOT.BAT File

Add the 'mode com5:96,n,8,1' command to the HPBOOT.BAT file.

Version Control