Setting Up the Monitor
3. Mount the HP Flat Panel Monitor Quick Release to a swing
arm or other mounting fixture using the four screws removed
with the Quick Release in the previous step.
Installing the Quick Release
Ä
CAUTION: The Quick Release can also be installed directly to a
wall to mount the monitor panel. It is designed to support a
maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall,
HP recommends that you consult with a qualified engineering,
architectural, or construction professional to determine the
appropriate type and quantity of mounting fasteners required for
your application and to ensure that your mounting solution is
properly installed to support applied loads.
User Guide 3–15
To Next Page
Loading...
