Do you have a question about the HP LP2475w and is the answer not in the manual?
3D | No |
---|---|
Pixel pitch | 0.270 x 0.270 mm |
Response time | 6 ms |
Display diagonal | 24 \ |
Display resolution | 1920 x 1200 pixels |
Vertical scan range | 48 - 85 Hz |
Horizontal scan range | 30 - 94 kHz |
Contrast ratio (dynamic) | - |
Contrast ratio (typical) | 1000:1 |
Display brightness (typical) | 400 cd/m² |
Supported graphics resolutions | 1920 x 1200 (WUXGA) |
AC (power) in | Yes |
USB hub version | 2.0 |
DVI-D ports quantity | 1 |
VGA (D-Sub) ports quantity | 0 |
USB Type-A downstream ports quantity | 6 |
LED indicators | Power |
Tilt angle range | -5 - 30 ° |
Cable lock slot type | Kensington |
Panel mounting interface | - mm |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 2 W |
Power consumption (typical) | 120 W |
Product color | Gray |
Country of origin | China |
Storage temperature (T-T) | 20 - 60 °C |
Operating temperature (T-T) | 5 - 35 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 20 - 80 % |
Cables included | AC, DisplayPort, DVI, HDMI, USB |
Depth (with stand) | 253 mm |
---|---|
Width (with stand) | 556.4 mm |
Height (with stand) | 421.6 mm |
Depth (without stand) | 83 mm |
Width (without stand) | 556 mm |
Height (without stand) | 362 mm |
Weight (without stand) | 9100 g |
Steps for powering on, connecting, and basic monitor usage.
Details of front panel buttons and their functions for OSD navigation.
Guide to using the OSD menu for picture settings.
Pinout and layout for digital input signal connectors.
Diagnostic steps for common monitor issues like no power or no picture.