To Next Page

To Previous Page

24" LCD Color Monitor HP LP2475w

5. Panel Specification

LM240WU4 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL)

backlight system. The matrix employs a-Si Thin Film Transistor as the active element.It is a transmissive type display

operating in the normally black mode. It has a 24inch diagonally measured active display area with WUXGA resolution

(1200 vertical by 1920 horizontal pixel array)Each pixel is divided into Red, Green and Blue sub-pixels or dots which are

arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale

signal for each dot,thus, presenting a palette of more than 16,7M(True) colors.

5.1 General Feature

Absolute Maximum Ratings

Other manuals for HP LP2475w

Questions and Answers:

Need help?

Do you have a question about the HP LP2475w and is the answer not in the manual?

General

3D	No
Pixel pitch	0.270 x 0.270 mm
Response time	6 ms
Display diagonal	24 \
Display resolution	1920 x 1200 pixels
Vertical scan range	48 - 85 Hz
Horizontal scan range	30 - 94 kHz
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	1920 x 1200 (WUXGA)
AC (power) in	Yes
USB hub version	2.0
DVI-D ports quantity	1
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	6
LED indicators	Power
Tilt angle range	-5 - 30 °
Cable lock slot type	Kensington
Panel mounting interface	- mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	120 W
Product color	Gray
Country of origin	China
Storage temperature (T-T)	20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DisplayPort, DVI, HDMI, USB

Weight and Dimensions