EasyManuals Logo

HP LP2475w Technical Specifications

HP LP2475w
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1.
1.1.
1.
Input/Scan: Scans all video inputs for valid signals.
5.
5.5.
5.
Plus (+)/Reset: Navigates forward through the OSD menu
and increases adjustment levels; when the OSD menu is
inactive, resets the monitor settings to factory default settings.
2.
2.2.
2.
Input/Quick Select: Displays valid video input signals for quick
selection.
6.
6.6.
6.
Turns Picture-In-Picture or Picture-Outside-Picture on or off.
NOTE:
NOTE: NOTE:
NOTE:
The PIP/POP feature must be initially set up using the
OSD menu. Select Video Input Control from the OSD menu to
make your PIP/POP, input source, window size and screen
position selections.
3.
3.3.
3.
Menu: Opens, selects or exits the OSD menu.
7.
7.7.
7.
Power LED: Green = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
4.
4.4.
4.
Minus (-)/Auto: Navigates backward through the OSD menu
and decreases adjustment levels; when the OSD menu is
inactive, activates the auto adjustment
feature to optimize the screen image.
8.
8.8.
8.
Power: Turns the monitor on or off
Model
ModelModel
Model
KD911A4
QuickSpecs
HP LP2475w 24-inch Widescreen LCD Monitor
HP LP2475w 24-inch Widescreen LCD MonitorHP LP2475w 24-inch Widescreen LCD Monitor
HP LP2475w 24-inch Widescreen LCD Monitor
Overview
DA - 13134 North America — Version 3 — August 29, 2008
Page 1

Other manuals for HP LP2475w

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LP2475w and is the answer not in the manual?

HP LP2475w Specifications

General IconGeneral
3DNo
Pixel pitch0.270 x 0.270 mm
Response time6 ms
Display diagonal24 \
Display resolution1920 x 1200 pixels
Vertical scan range48 - 85 Hz
Horizontal scan range30 - 94 kHz
Contrast ratio (dynamic)-
Contrast ratio (typical)1000:1
Display brightness (typical)400 cd/m²
Supported graphics resolutions1920 x 1200 (WUXGA)
AC (power) inYes
USB hub version2.0
DVI-D ports quantity1
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity6
LED indicatorsPower
Tilt angle range-5 - 30 °
Cable lock slot typeKensington
Panel mounting interface- mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)120 W
Product colorGray
Country of originChina
Storage temperature (T-T)20 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, DisplayPort, DVI, HDMI, USB
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)253 mm
Width (with stand)556.4 mm
Height (with stand)421.6 mm
Depth (without stand)83 mm
Width (without stand)556 mm
Height (without stand)362 mm
Weight (without stand)9100 g

Related product manuals