HP LP3065 - Page 2

Panel Type 30.0-inch Wide Format Active Matrix TFT (thin film transistor)
Viewable Image Area
(diagonal)
29.77 in (75.623 cm)
Screen Opening (WxH) 25.3 x 15.8 in (64.3 x 40.3 cm)
Panel Type IPS
Aspect Ratio 16:10
Viewing Angle
(typical)
1
Up to 178° H/ 178° V (10:1 minimum contrast ratio)
Brightness (typical)
1
370 nits (cd/m
2
)
Contrast Ratio
(typical)
1
1000:1
Dynamic Contrast
Ratio (typical)
1
3000:1
Response Rate
(typical)
1
12 ms (5 ms average gray to gray)
Pixel Pitch 0.250 mm
Backlight Lamp Life
(to half brightness)
40K hours
Color Gamut 102% of NTSC
Bezel Width 24 mm (left and right)
User Controls Buttons and Switches Input select, brightness up, brightness down, power
User Controls Brightness, input selection
Signal Interface/
Performance
Horizontal Frequency 100 KHz
Vertical Frequency 60 Hz
Native Resolution 2560 x 1600 @ 60 Hz (native aspect ratio of 16:10)
2
Pixel Clock Speed 275 MHz
Anti-Glare Yes
Anti-Static Yes
Default Color
Temperature
6500 K
Video/Other Inputs Plug and Play Yes
Self Powered USB 2.0
Hub
One upstream, four downstream ports (located on side of monitor,
cable included)
Input Connectors Three dual-link DVI-D inputs with HDCP over digital DVI
2
Video Cable Two dual-link DVI cables
Video Cable Length 5.9 ft (1.8 m)
Power Input Power Auto-Ranging, 100 to 240 VAC; internal power supply, 50 Hz/60 Hz
Typical Power
Consumption
132 watts
Maximum < 176 watts
Power Saving < 2 watts
Power Cable Length 5.9 ft (1.8 m)
Mechanical Dimensions
(H x W x D)
Unpacked 19.3 to 23.2 x 27.2 x 9.5 in
(49.0 to 59.0 x 69.2 x 24.0 cm)
Unpacked w/o stand
(head only)
17.9 x 27.2 x 3.3 in
(45.5 x 69.2 x 8.4 cm)
QuickSpecs
HP LP3065 30-inch Widescreen LCD Monitor
Technical Specifications
DA - 12621 Worldwide QuickSpecs — Version 16 — 12/15/2008 Page 2