HP LTO Ultrium series User Manual

HP SAS Min-Min 1x-2M Cable Assembly Kit
NOTE: Use this cable to connect HP SAS external tape devices to HP SAS controllers
with external Mini-SAS (SFF8088) connectors.
AE470A
HP SAS MIN-MIN 1X-4M Cable Assembly Kit
NOTE: Use this cable to connect HP SAS external tape devices to HP SAS controllers
with external Mini-SAS (SFF8088) connectors.
AE465A
HP 1U SAS TP I-E 3HDDs X 1Tape Drive X4M Server Cable Assembly Kit
NOTE: This split cable connects internally to SAS Hard Drive Cage (3x) and externally to
the tape device (1x) with other connector attaching to HP SAS controllers with SAS 4i
(SFF8484) connectors. The 1x cable occupies additional PCI slot on the server.
AE464A
HP SAS MIN-MIN 3X1X-5M Cable Assembly Kit
NOTE: This split cable connects internally to SAS Hard Drive Cage (3x) and externally to
the tape device (1x) with other connector attaching to the Smart Array P400i controller
inside a DL360 G5 or DL365 G5 server. The 1x cable occupies additional PCI slot on the
server.
AG452A
QuickSpecs
HP StoreEver LTO Ultrium Tape Drives
Options
DA - 13572 North America — Version 14 — September 13, 2013 Page 27

HP LTO Ultrium series Specifications

General

Generations	LTO-1 to LTO-9
Capacity (Compressed)	Varies by generation (e.g., LTO-9: 45 TB)
Capacity (Native)	Varies by generation (e.g., LTO-9: 18 TB)
Transfer Rate (Compressed)	Varies by generation (e.g., LTO-9: 1000 MB/s)
Transfer Rate (Native)	Varies by generation (e.g., LTO-9: 400 MB/s)
Encryption	AES 256-bit
WORM Capability	Yes
Interface	SAS
Form Factor	Half-height
Backward Read Compatibility	Two generations back
Backward Write Compatibility	One generation back
Partitioning Support	Yes
Power Consumption (Idle)	Varies by model (e.g., ~10-15 W)
Power Consumption (Operating)	Varies by model
Backward Compatibility	Read and write compatible with one previous generation, read compatible with two previous generations (varies by generation)