HP LTO Ultrium series

Ultrium 448 Ultrium 920 Ultrium 1760 Ultrium 3000 Ultrium 6250
Power Specifications Power requirements,
Internal (including
rack-mount model)
+5V@2.5A
(typical)
+5V@2.5A
(max)
+12V@0.7A
(typical)
+12V@2.1A
(max)
+5V@2.5A
(typical)
+5V@2.5A
(max)
+12V@0.7A
(typical)
+12V@2.1A
(max)
+5V@2.5A
(typical)
+5V@2.5A
(max)
+12V@0.7A
(typical)
+12V@2.1A
(max)
5V@3.5A
(typical)
+5V@3.7A
(max)
+12V@0.7A
(typical)
+12V@1.9A
(max)
5V@3.5A
(typical)
+5V@4.0A
(max)
+12V@0.6A
(typical)
+12V@2.5A
(max)
Power requirements,
External
100 to 240 VAC,
50-60 Hz, auto-
ranging, 0.7A
max
100 to 240 VAC,
50-60 Hz, auto-
ranging, 0.7A
max
100 to 240 VAC,
50-60 Hz, auto-
ranging, 0.7A
max
100 to 240 VAC,
50-60 Hz, auto-
ranging, 0.7A
max
100 to 240 VAC,
50-60 Hz, auto-
ranging, 0.8A
max
Power requirements,
Array Module
+5V@2.5A
(typical)
+5V@2.5A
(max)
+12V@0.7A
(typical)
+12V@2.1A
(max)
+5V@2.5A
(typical)
+5V@2.5A
(max)
+12V@0.7A
(typical)
+12V@2.1A
(max)
N/A N/A N/A
Power consumption 13 Watts idle
20 Watts typical
33 Watts max
13 Watts idle
20 Watts typical
33 Watts max
13 Watts idle
20 Watts typical
33 Watts max
7 Watts idle
24 Watts typical
34 Watts max
4.1 Watts idle
24.5 Watts
typical
39 Watts max
Environmental
Specifications
Temperature range Operating:
50° F to 95° F (10° C to 35° C) if 6 CFM airflow is provided
50° F to 104° F (10° C to 40° C) if 8CFM airflow is provided for Full-Height, 5CFM
airflow for Half-Height
Non-Operating: -40° F to 151° F (-40° C to 66° C)
Non-condensing humidity
range
Operating: 20 to 80% RH (Non-condensing, max wet bulb temperature = 26C)
Non-Operating: 10 to 95% RH (Non-condensing, max wet bulb temperature =
26C)
QuickSpecs
HP StoreEver LTO Ultrium Tape Drives
Technical Specifications
DA - 13572 North America — Version 14 — September 13, 2013 Page 34