HP M607n - Printer Power On and Basic Configuration

7
7
7.2
7.1
7.3
7.1
Connect the power cable between the printer and a grounded AC outlet.
7.2
Turn on the printer.
7.3
On the control panel, set the language,
the date/time format, and the time zone.
NOTE: For advanced conguration of network-connected printers, see the User Guide on the printer CD or go to www.hp.com/support/ljM607,
www.hp.com/support/ljM608, or www.hp.com/support/ljM609.
CAUTION: Make sure your power source is adequate for the printer voltage rating. The voltage rating is on the printer label. The printer uses either
100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the printer, use only the power cable that is provided with the printer.
EN
HE
7.3 7.2 7.1
Atom_HIG-2-7_K0Q14-90903.indd 7 10/13/2016 12:11:06 AM