Important HP Media Center PC Updates 3
4 Right-click a free area of the Windows desktop and
choose Properties.
5 Click the Settings tab, and then click the
Advanced button on that tab.
6 Click the ATI Displays tab.
Or
Click the GeForce 6600 tab. Click nView
Display Settings, Device Settings, and then you
can select the various screen adjustment settings.
Click Apply and then click OK.
7 Click the TV button (the small bar above the TV
icon). The TV Properties window opens. (Your TV
must be connected to the system.)
NOTE: You may need to click the On button (at the
left corner of the TV button bar) to make the On
button green, and then click Apply.
8 Click the Adjustments tab.
9 Adjust the screen position or screen size, and then
click Apply.
10 Click OK as needed to close the windows.
11 Repeat steps 4 through 10 to adjust your TV display
settings.
Configuring Audio Out
After configuring the Media Center speaker settings
using the Media Center setup wizard, check that the
Sound Effect Manager shows the correct speaker system
setup. Use this procedure anytime you change the
speaker setup.
NOTE: If you are using digital audio out, you do not
need to perform this procedure.
1 Close or minimize Media Center.
2 Click the Sound Effect speaker icon in the
system tray.
3 Check that the speaker setup matches your speaker
system. Adjust settings if necessary.
Using HP Tunes
in Media Center
To use HP Tunes and iTunes with Media Center you
need to:
1 Initialize iTunes by completing a setup wizard.
2 Add songs to the iTunes library and create playlists.
HP Tunes only displays songs and playlists that exist
in iTunes.
NOTE: If you do not complete these steps, an error
message is displayed when HP Tunes is launched
indicating that a problem has occurred in iTunes that is
preventing this program from running.
Completing the iTunes Setup
Wizard
1 Close Media Center, if open.
2 Double-click the iTunes shortcut icon on
the desktop.
3 When the iTunes Setup Assistant wizard
opens, follow the onscreen instructions.
4 Close iTunes.
5 Open Media Center, and then open HP Tunes.
Adding songs to the iTunes library
You can add songs to the iTunes library from HP Tunes
in Media Center or from iTunes on your desktop.
To add songs using iTunes:
1 Double-click the iTunes shortcut icon on
the desktop.
2 Insert a CD into the drive. After a moment
the songs on the CD are listed in the iTunes
window.
3 Click the Import button at the top right corner of the
iTunes window.
NOTE: For more information about adding songs and
creating playlists in iTunes, see the Help menu in iTunes.
To Next Page
Loading...
Need help?
General