Operations 22
4.
Remove the air baffle.
Installing the air baffle
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Insert the air baffle.
2. Install the access panel ("Installing the access panel" on page 21).
3. Close and lock the bezel.
4. Power on the server ("Power up the server" on page 19, "Powering up and configuring the server" on
page 29).
To Next Page
Loading...
