HP N9120 - ScanJet Document Flatbed Scanner User Manual

3. Align the edges of the documents by tapping the bottom of the stack against the table
top. Rotate the stack 90 degrees and repeat.
4. Place the stack in the middle of the input tray. Load the stack face up. For fastest
scanning, load the stack with the left edge leading into the ADF.
NOTE: In the scanning software, choose the layout setting that matches the
orientation of the originals in the ADF.
5. Adjust the paper guides to the width of the documents. Take care not to overtighten
the guides, which can restrict paper feeding, but make sure that the paper guides
touch the edges of the documents.
6. Gently push the stack forward to trip the tray sensor.
Load original documents in the automatic document feeder 11
English

HP N9120 - ScanJet Document Flatbed Scanner Specifications

General

Scanner Type	Flatbed
Connectivity	USB 2.0
Bit Depth	48-bit
Levels of grayscale	256
ADF Capacity	50 sheets
Supported Operating Systems	Windows, macOS
Scan Resolution	Up to 600 dpi