HP N9120 - ScanJet Document Flatbed Scanner User Manual

1
3
4
2
5
1 HP Scanjet N9120 scanner
2 Scanning software CDs
3 Power cable
4 USB cable
5 Getting Started Guide (this book)
Install the software
CAUTION: Do not connect the USB cable until you are prompted during the software
installation.
1. Decide what software to install.
• If you will be using the scanner with document-management and scanning
software that you already own, you only need to install the HP Scanjet Drivers
and Tools.
• If you do not already have document-management and scanning software, you
can use the software that is shipped with the scanner. Read the onscreen
descriptions of the software during the installation to decide what software to
install. (The software and the number of CDs that are shipped with the scanner
might vary by country/region.)
2. Insert the HP Scanning Software CD into the computer CD drive. Wait for the
installation dialog box to appear.
3. Click Install Software, and then follow the instructions on the screen.
4. Use the power cable to connect the scanner to an electrical outlet.
Install the software 3
English

HP N9120 - ScanJet Document Flatbed Scanner Specifications

General

Scanner Type	Flatbed
Connectivity	USB 2.0
Bit Depth	48-bit
Levels of grayscale	256
ADF Capacity	50 sheets
Supported Operating Systems	Windows, macOS
Scan Resolution	Up to 600 dpi