1. Open the embedded web server. For more information, see Embedded web server
on page 155.
2. Click the Network tab, and then click IPv4 Configuration in the Wired (802.3) section.
3. In the IP Address Configuration section, click Manual.
4. A message appears warning that changing the IP address removes the printer from the network.
Click OK to continue.
5. Change the IP settings:
●
Manual IP Address
●
Manual Subnet Mask
●
Manual Default Gateway
6. Click Apply.
Reset network settings
To reset the administrator password and network settings, press and hold the (Wireless) button
and the
(Cancel) button for three seconds.
NOTE: Print the network configuration page and verify that the network settings have been reset.
For more information, see
Understand the network configuration page on page 83.
By default, the network name (SSID) is “HP-Print-**-Officejet 7110”, where “**” is a random number
generated by the printer.
142 Appendix C Network setup ENWW
To Next Page
Loading...
