2. Slide the paper-width guides inward until they stop at the left and right edges of the paper.
Update the printer
By default, if the printer is connected to a network and Web Services has been enabled, the printer
automatically checks for updates.
To update the printer using the printer control panel
1. From the printer control panel display, touch Setup.
2. Touch Printer Maintenance.
3. Touch Update the Printer.
To enable the printer to automatically check for updates
NOTE: The default setting of Auto Update is On.
1.
From the printer control panel display, touch
(HP ePrint).
2. Touch OK.
3. Touch Settings, and then touch Update the Printer.
4. Touch Auto Update and then touch On.
To update the printer using the embedded web server
1. Open the EWS.
For more information, see
Embedded web server.
2. Click the Tools tab.
3. In the Printer Updates section, click Firmware Updates, and then follow the on-screen instructions.
NOTE: If a printer update is available, the printer downloads and installs the update, and then restarts.
ENWW Update the printer 19
To Next Page
Loading...