• Do not overload the tray. For more information, see Load media.
• To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays:
ƕ Multipart forms
ƕ Media that is damaged, curled, or wrinkled
ƕ Media with cutouts or perforations
ƕ Media that is heavily textured, embossed, or does not accept ink well
ƕ Media that is too lightweight or stretches easily
ƕ Media that contains staples or clips
Load media
This section provides instructions for loading media into the printer.
This section contains the following topics:
•
Load standard-size media
•
Load envelopes
•
Load cards and photo paper
•
Load transparencies
•
Load custom-size media
Load standard-size media
This section provides instructions for loading media into the printer.
NOTE: Tray 2 is sold as an accessory. For ordering information, see HP supplies
and accessories.
Use these instructions to load standard media.
To load Tray 1 (main tray)
1. Lift the output tray.
2. Slide the media guides out to the widest setting.
3. Insert the media print-side down in the center of the tray, make sure the media
does not exceed the line marking in the tray. Slide the media guides towards the
Load media
11
To Next Page
Loading...
