HP Officejet Pro X451 Series - Connect the product to a network

3. Use a screwdriver to depress the tab (callout 1), and then remove the cover (callout 2) by sliding
the cover up 10 mm (0.4 in), and then rotating the cover away from the product.
Figure 1-35 Remove the left front cover (2 of 2)
1
2
Top cover
1. Remove the following components:
●
Rear cover. See
Rear cover on page 23.
●
Left door. See
Left door on page 24.
●
Left rear cover. See
Left rear cover on page 27.
●
Left front cover. See
Left front cover on page 28.
● Output bin flap. See
Output bin flap on page 13.
ENWW
Removal and replacement procedures
29