1. With the handle facing you, remove the right side screw and end cap from the cartridge. Be careful of the drum cover spring!
Remove it with the end cap.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • HP P1505 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
www.uninetimaging.com
USA • UK • EUROPE • AFRICA • JAPAN • CHINA • BRAZIL • MEXICO • COLOMBIA • ARGENTINA • VENEZUELA
11124 Washington Blvd., Culver City, CA, U.S.A. 90232 • Ph +1 310 280 9620 • Fx +1 310 838 7294 • techsupport2@uninetimaging.com
SUPPLIES REQUIRED
1. 100g (Preliminary wt.) HP-P1505 toner (unique to this series)
2. New Drum (unique to this series)
3. Wiper Blade (unique to this series)
4. Dr. Blade (unique to this series)
5. Magnetic Roller (unique to this series)
6. Sealing Strip (Unique to this series)
7. Cotton Swabs
8. Isopropyl Alcohol
9. Drum Padding Powder
10. Conductive Grease
TOOLS REQUIRED
1. Phillips head screw driver
2. Small Common screw driver
3. Needle nose pliers
4. Jewelers Screwdriver set
To Next Page
Loading...