Printer Failure
Description
The printer refuses to function.
Recommended action
Have a replacement cartridge on hand. You do not need to replace the cartridges until prompted to.
Problem with Print System
Description
The cartridge identied in the message is missing, damaged, incompatible, or inserted into the wrong slot in
the printer.
Recommended action
Printing functionality is disabled. Visit the HP Customer Support website.
Problem with Printer Preparation
Description
The printer clock has failed and cartridge preparation may not be complete. The estimated Cartridge Level
gauge might be inaccurate.
Recommended action
Check the print quality of your print job. If it is not satisfactory, running the printhead cleaning procedure
from the toolbox might improve it.
Problem with SETUP cartridges
Description
There is a problem with the SETUP cartridges and the printer cannot complete system initialization.
Recommended action
Visit the HP Customer Support website.
Use SETUP cartridges
Description
The SETUP cartridges have been removed before the product has completed initialization.
Recommended action
Use the SETUP cartridges that came with your product for product initialization.
When you rst set up the printer, you must install the SETUP cartridges that shipped in the box with the
printer. These cartridges calibrate your printer before the rst print job. Failure to install the SETUP cartridges
during the initial product setup causes an error. If you installed a set of regular cartridges, remove them and
install the SETUP cartridges to complete printer setup. After printer setup is complete, the printer can use
regular cartridges.
ENWW Cartridge issues 77
To Next Page
Loading...