4. Push down on the paper to make sure that the stack is below the paper limit tabs on the front and the
side of the tray.
5. Put the tray into the product.
Load optional Tray 4
Tray 4 is available only in a bundle with Tray 3 and a cart. Tray 3 attaches to the bottom of the product. Tray 4
attaches to the bottom of Tray 3 and sits on top of the cart. Load media into Tray 4 as you did for Tray 3.
Load envelopes
You can load envelopes into Tray 1 or Tray 2.
To load envelopes into Tray 1
1. Open Tray 1.
ENWW Load media 49
To Next Page
Loading...