●
Power options > Printer sleep to change the length of time the printer waits before going into sleep
mode (see Sleep mode on page 11). You can set the time from 5 to 240 minutes. The default time is 20
minutes (total time including 5 minutes in dim mode).
●
Unit selection to change the units of measurement in the front-panel display. Select English or Metric.
By default, units are set to Metric.
●
Restore factory settings to restore the printer settings to their original values as set in the factory. This
option restores all of the printer settings except the Gigabit Ethernet settings and paper presets.
HP Utility
The HP Utility enables you to manage your printer from a computer with a TCP/IP connection.
NOTE: The HP Utility under Mac OS X and the HP Designjet Utility under Windows have similar functions and
are sometimes referred to collectively as the HP Utility in this guide.
●
Under Windows, start the HP Designjet Utility from the icon on your taskbar or from Start > All
Programs
> HP > HP Designjet Utility > HP Designjet Utility. This launches the HP Designjet Utility,
showing the printers installed on your computer. When you open the HP Designjet Utility for the rst
time, it may oer you an automatic update with enhanced functionality that we recommend you to
accept.
●
Under Mac OS X, launch the HP Utility from your Dock shortcut or by selecting Applications > HP > HP
Utility. This launches the HP Utility, showing the printers installed on your computer.
When you select your printer in the left pane, everything that appears in the right pane is specic to that
printer.
Embedded Web Server
The Embedded Web Server is a Web server running inside the printer. You can use it to obtain printer
information, manage settings and presets, install new rmware, and troubleshoot problems. Service
engineers can use it to retrieve internal information that helps to diagnose printer problems.
12 Chapter 1 Introduction ENWW
To Next Page
Loading...
Need help?
General