3.
Remove the memory module (2) by pulling it away from the slot at an angle.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module.
CAUTION: To protect a memory module after removal, place it in an electrostatic-safe
container.
To replace the memory module:
1.
Align the notched edge of the replacement memory module with the tab in the memory module
slot, and then press the module (1) into the slot at a 45-degree angle until it is firmly seated.
70 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
