Switch cover and keyboard
Description Spare part number
Switch cover, for use in white computers (includes LED board and cable) 516300-001
Switch cover, for use in black computers (includes LED board and cable) 519269-001
White keyboard 516357-xxx
Black molded keyboard 519265-xxx
Black painted keyboard 519266-xxx
NOTE: For a detailed list of available keyboards, see Sequential part number listing on page 28.
Before removing the switch cover and keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Remove the primary hard drive cover (see
Primary hard drive cover on page 45).
Component replacement procedures 57
To Next Page
Loading...
Need help?
General