5 Maintenance
●
Inserting or removing the battery
●
Replacing or upgrading the hard drive
●
Adding or replacing memory modules
●
Updating programs and drivers
●
Using SoftPaq Download Manager
Inserting or removing the battery
NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide.
To insert the battery:
▲
Insert the battery (1) into the battery bay, and pivot the battery (2) downward until it is seated.
The battery release latch (3) automatically locks the battery into place.
To remove the battery:
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work and initiate Hibernation or shut down the
computer through Windows before removing the battery.
1. Slide the battery release latch (1) to release the battery, and then pivot the battery (2) upward.
24 Chapter 5 Maintenance
To Next Page
Loading...
