HP Pavilion IPS User Manual

2 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Attaching the Monitor Base
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can
cause damage.
TIP: For monitor displays with glossy bezels, consider the placement of the display, because the
bezel might cause interfering reflections from surrounding light and bright surfaces.
1. Lift the monitor from its box and place it face down on a flat surface.
2. Insert the stand into the slot on the back of the display head until it clicks.
Figure 2-1 Inserting the stand
Attaching the Monitor Base
3

HP Pavilion IPS Specifications

General

Brand	HP
Model	Pavilion IPS
Category	Monitor
Language	English