1 Unpack the printer
Remove the tape from inside and around the printer.
The printer box contains the following items:
1. HP Photosmart 320 series printer
2. Setup Guide (this poster)
3. User’s Guide
4. HP Photosmart software on CD
5. Tri-color print cartridge
6. Sample media pack and resealable media bag
7. Power supply (power supplies may vary in
appearance or have an additional power cord)
Note: Some contents may vary by country/region.
2 Plug in the power cord
1. Connect the power cord to the back of the printer.
2. Plug the power cord into a working electrical
outlet.
3 Turn on the printer
1. Press On to turn on the printer.
2. When Select language appears on the printer
screen, press or to highlight your language.
3. Press OK to select your language and continue.
4. When Set LCD language to (your language)
appears on the printer screen, press or to
highlight Yes.
5. Press OK to select Yes and continue.
6. When Select country/region appears on the
printer screen, press or to highlight your
country/region.
7. P r e s s OK to select your country/region.
4 Remove the tape on the
print cartridge
1. Open the print cartridge package.
2. Pull the pink pull-tab to remove the clear tape from
the print cartridge.
Do not touch or remove
the ink nozzles or the
copper-colored contacts!
2
1
3
7
4
6
5
1
2
Setup Guide
HP Photosmart 320 series
On button
Printer screen
Arrow buttons
OK button
*Q3414-90157* Q3414-90157
To Next Page
Need help?
General
