6. Twist the orange cap to snap it off.
7. Using the colored shaped icons for help, slide the cartridge into the empty slot until it
clicks into place and is seated firmly in the slot.
CAUTION: Do not lift the latch handle on the print carriage to install the
cartridges. Doing so can result in incorrectly seated cartridges and printing
problems. The latch must remain down in order to correctly install the cartridges.
Make sure that you insert the cartridge into the slot that has the same shaped icon
and color as the one you are installing.
8. Repeat steps 3 through 6 for each cartridge you are replacing.
9. Close the cartridge access door.
Chapter 3
48 HP Photosmart overview
HP Photosmart overview
To Next Page
Loading...