HP Photosmart C4400

2
1
*Q8383-90052*
*Q8383-90052*
Q8383-90052
HP Photosmart C4400 All-in-One series
Abaissez le bac d’alimentation du papier
et ouvrez la porte d’accès aux cartouches
d’impression.
Retirez tout le matériel d’emballage et le fi lm
protecteur du périphérique. Si un autocollant est
apposé sur l’écran graphique couleur, retirez-le.
Fermez la porte d’accès aux cartouches
d’impression.
a.
b.
c.
Commencez ici
IMPORTANT : ne connectez pas le câble USB
avant d’y avoir été invité à l’ étape 11 .
Comience aquí
Baje la bandeja de papel y la puerta
de los cartuchos de impresión.
Extraiga todo el material de embalaje
y la película protectora del dispositivo.
Si hay un adhesivo en la pantalla
de gráfi cos en color, retírelo.
Cierre la puerta de los cartuchos
de impresión.
a.
b.
c.
IMPORTANTE: No conecte el cable USB hasta
que se le indique en el Paso 11 .
Start Here
Lower both the paper tray and the print
cartridge door.
Remove all packing material and protective
fi lm from the device. If there is a sticker on
the color graphics display, remove it.
Close the print cartridge door.
a.
b.
c.
IMPORTANT: Do not connect the USB cable
until prompted in Step 11 .
FR
FR
EN
EN
ES
ES
FREN
ES
abc

HP Photosmart C4400 Specifications

General

Scanner Type	Flatbed
Scan Resolution	Up to 1200 x 2400 dpi
Display	1.5-inch LCD
Supported Media Sizes	Letter, Legal, 4 x 6 in, 5 x 7 in, 8 x 10 in, No. 10 envelopes
Functions	Print, copy, scan
Print Speed (Black)	Up to 30 ppm
Print Speed (Color)	Up to 23 ppm
Paper Handling Input	100-sheet input tray
Paper Handling Output	50-sheet output tray
Duplex Printing	Manual (driver support provided)
Print Resolution	Up to 4800 x 1200 optimized dpi
Copy Resolution	Up to 600 dpi black
Connectivity	USB 2.0
Ink Cartridges	1 black, 1 tri-color (cyan, magenta, yellow)
Print Technology	Inkjet

Summary

Initial USB Connection Guidance

USB Cable Connection Warning

Warning against connecting the USB cable until prompted in a later step.

Step 2: Unpacking and Preparation

Prepare Printer for Cartridge Installation

Open tray, remove packing material, and close cartridge door.

Step 3: Verify Box Contents

Step 4: Powering On the Printer

Connect Power and Turn On

Connect the power cord and adapter, then press the power button to turn on the device.

Step 5: Language and Cartridge Prompts

Set Language and Region

Follow prompts to select language and country/region using arrows and OK button.

Proceed to Cartridge Installation

If prompted to install cartridges, proceed to the next step in the guide.

Step 6: Access Print Cartridge Area

Open Cartridge Door and Check Carriage

Open the print cartridge door and ensure the carriage moves correctly.

Step 7: Prepare Cartridges for Installation

Remove Protective Tape

Carefully remove the tape from both cartridges, avoiding contact with contacts.

Step 8: Install Print Cartridges

Insert Cartridges Correctly

Insert tri-color and black cartridges into the correct slots until they snap into place.

Confirm Cartridge Installation

Close the cartridge door and press OK to confirm the installation of genuine HP cartridges.

Step 9: Load Paper

Load Paper into Tray

Extend the paper tray and load plain white paper, then press OK.

Step 10: Align Print Cartridges

Print Alignment Page

Follow display instructions to print the alignment page.

Place Alignment Page on Scanner Glass

Place the top of the alignment page face down on the scanner glass.

Software Installation - Windows

Install Software from CD

Insert the green CD, launch setup.exe, and follow onscreen instructions.

Connect USB Cable to Computer

Connect the USB cable to the printer and the computer after software prompt.

Software Installation - Mac

Install Software from CD

Insert the green CD, launch HP Installer, and follow setup assistant.

Connect USB Cable to Computer

Connect the USB cable to the printer and the computer.

Troubleshooting Common Issues

Add Hardware Wizard Appears

Cancel screens, unplug USB, and insert the HP All-in-One CD.

Device Setup Failed

Unplug/replug device, check connections, ensure USB is not in keyboard/hub.