HP Photosmart R927 - Optimizing Focus Performance; Using Focus Lock

3.
Press
when the date, time, and format settings
are correct, then press
again to confirm.
Install and format an optional
memory card
1. Turn off the camera and
open the Battery/
Memory card door.
2. Insert the optional
memory card in the
smaller slot as shown.
Make sure the memory
card snaps into place.
3. Close the Battery/Memory card door and turn on the
camera.
Always format memory cards before first use.
1.
With the camera turned on, press
, then use to
move to the
Playback Menu.
2. Press
to display the Delete sub-menu, then
press
.
3.
Use
to select Format Card, then press .
4.
Use
to select Yes, then press to format the
card.
Once you install a memory card, all new images and
video clips are stored on the card, rather than in internal
memory.
To use internal memory and view images stored there,
remove the memory card.
Install the software
The HP Photosmart Software provides features for
transferring images and video clips to your computer, as
Setting up your camera 13
English