Remove the top cover:
1. Position the computer upside-down with the front toward you.
2. Remove the following covers and screws that secure the top cover to the computer:
(1) 4 rubber screw covers
(2) 10 Torx T8M2.5×6.0 screws
3. Remove the following screws that secure the top cover to the computer:
(1) 3 Phillips PM2.0×4.0 screws from the optical drive bay
(2) 3 Phillips PM2.5×2.5 broadhead screws from the battery bay
4. Turn the computer upright and open it as far as possible.
60 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
