HP Probook 5320m - Page 96

5–12 Maintenance and Service Guide
Computer Setup
Select To do this
System Configuration menu (continued)
Built-In Device Options (continued) ■ Enable/disable a modem device (enabled by default).
■ Enable the ambient light sensor (enabled by default).
■ Enable/disable the Notebook MultiBay device (enabled
by default).
■ Enable/disable the integrated camera (select models only;
enabled by default).
■ Enable/disable optical disk drive (enabled by default).
■ Enable/disable internal microphones (enabled by default).
Port Options (all are enabled by default)
✎
All port options are enabled by default.
■ Enable/disable the Smart Card slot.
■ Enable/disable the ExpressCard slot.
■ Enable/disable the serial port.
■ Enable/disable the parallel port.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay devices
and ExpressCard devices on the advanced
port replicator.
■ Enable/disable the 1394 port.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.