b. Remove the display bezel (4).
The display bezel is available using spare part numbers 734301-001 (for use only on computer
models equipped with a webcamera) and 734302-001 (for use only on computer models not
equipped with a webcamera).
3. If it is necessary to replace the display panel:
a. Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure.
CAUTION: Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
Display assembly 105
To Next Page
Loading...
