EasyManuals Logo

HP ProBook 6565b Getting Started Guide

HP ProBook 6565b
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
To remove an optical drive from the upgrade bay:
1. Save your work.
2. Shut down the computer and close the display.
3. Disconnect all external hardware devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6. Remove the battery (see
Inserting or removing the battery on page 32).
7. Remove the bottom cover (see
Removing the bottom cover on page 34).
8. Loosen the upgrade bay screw (1).
9. Using a flat-bladed screwdriver, gently push the tab to release the optical drive (2).
10. Remove the optical drive from the upgrade bay (3).
To install an optical drive in the upgrade bay:
1. Insert the optical drive into the upgrade bay (1).
40 Chapter 6 Maintenance

Table of Contents

Other manuals for HP ProBook 6565b

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProBook 6565b and is the answer not in the manual?

HP ProBook 6565b Specifications

General IconGeneral
RAMUp to 16 GB DDR3
Card ReaderSD/MMC
ProcessorAMD A-Series
Display15.6-inch HD (1366x768) or HD+ (1600x900)
Operating SystemWindows 7 Professional
Battery6-cell (55 Whr) Li-Ion
Optical DriveDVD+/-RW SuperMulti DL
Wireless802.11a/b/g/n, Bluetooth
AudioStereo speakers
PortsUSB 3.0, VGA, RJ-45, RJ-11, headphone/microphone combo
Webcam720p HD Webcam
Dimensions37.4 x 25.1 x 3.4 cm

Related product manuals