HP ProCurve 3500 - Page 29

1-19
Introducing the Switch
Back of the Switch
Introducing the Switch
.
Figure 1-19. Back of the HP ProCurve 3500yl-48G-PWR Switch
PoE+ Switches
Figure 1-20. Back of the HP ProCurve 3500yl-24G-PoE+ Switch
Figure 1-21. Back of the HP ProCurve 3500yl-48GPoE+ Switch
yl Module Slot
Each of the 3500yl and 6200yl switches have one, 10 gigabit expansion slot
that can accept one of two modules that provides either copper or fiber optic
media that conforms to the 10-Gigabit Ethernet standard as well as dual 10
gigabit copper or uplink ports.
Line: 50/60 Hz.
100-127 V~ 10 A
200-240 V~ 5 A
12V System Power (RPS) Input
Auxiliary Port
Console
50V PoE (EPS) Input
CAUTION: MULTIPLE POWER SOURCES
Disconnect all AC power cords, and EPS and RPS
cables to completely remove power from the unit.
Connect ProCurve 620 EPS only
PoE
123456
Serial No. SG12345678
System MAC
0001e7
Address
AC power connector
Console Port
RPS Input Port
Auxiliary Port and LED
yl module slot
EPS Input Port
EPS Input Port
AC power
connector
yl module slot
RPS Input Port
EPS Input Port
AC power
connector
yl module slot
Auxiliary Port and LED
RPS Input Port